Korea Develops High Performance Anode Adhesive Materials for Lithium Batteries

The Korean Research Consortium released a news release saying that it has jointly developed a new type of adhesive anode material with high voltage and high capacity in cooperation with Chungnam University and Jinwu University of Technology, which has significantly increased the energy density of secondary Lithium Batteries. The research was published in the Advanced Academic Materials, an international academic magazine.

The currently used lithium cobalt oxide (LiCoO2) and nickel-cobalt-manganese (NCM) have limited capacity and require the use of larger anode materials. Lithium-rich manganese oxide has attracted attention as a new generation of anode material, which is twice as high as lithium cobalt oxide energy capacity, but can only achieve high capacity by increasing the charging voltage above 4.4V. However, in this case, the secondary battery may generate heat, so that the viscosity of the adhesive is weakened, causing problems such as the deterioration of the battery performance.

Korea is committed to the development of high energy density secondary batteries. The anode material developed by the research group is to form a protective film on the surface of the pole at a high voltage of 4.7V and a high temperature of 55°C to maintain the stability of the interface without the need for additional electrolyte additives and to maintain a stable and viscous adhesive material. The lithium cobalt oxide used has more than twice the capacity and more stable charge and discharge performance. The research group stated that this technology can further promote the development of secondary batteries.