How to activate the battery?

As a backup power supply for important equipment, the battery pack is an important line of defence for the reliable operation of the equipment, but in fact, the phenomenon of the operating equipment losing the main power source after the battery problem is forced to stop occurs frequently, the reason is:

In the process of using the Storage Battery, due to the difference of the individual battery itself and the external environment, the voltage of each individual battery in the battery is actually not balanced, and the amount of electricity stored is not equal, so it is easy to cause the battery in the overall charge and discharge process of the battery, one of the individual battery has been overcharged or over-discharged, which greatly reduces the service life of the battery.

Rechargeable battery

When the battery pack runs for a long time, due to the electronic drift phenomenon generated within it, individual batteries will lag behind and deteriorate, resulting in consistency differences. The internal resistance of one or more cells increases and the battery becomes a backward battery. The serious deterioration of the battery group is far from meeting the requirements of actual production, and the deterioration failure of individual batteries leads to the failure of the whole Rechargeable Vrla Accumulator group, and so on.

At present, the working mode of the battery is mostly used as a backup power supply, and the current charger is almost a high-frequency switching power supply, its charging mechanism is equal charging, floating charging and other ways, there is no corresponding adjustment for the backup characteristics of the battery operation, and it is impossible to make the balanced charging of each battery in the battery set. Often, due to the voltage change (higher or lower) of some batteries in the battery pack, other batteries are overcharged or undercharged, resulting in battery water loss, positive plate corrosion, thermal runaway and so on.

Intelligent battery online activation system is specially designed for lead-acid battery voltage balancing products, can automatically detect and monitor the voltage of each battery cell, whether in battery charging, discharging and static, automatically balance the voltage of each battery, online to run the battery traditional charging mode optimization, so that each battery is in the same working state.

The online activation system of battery packs automatically activates the weak batteries online by using microcomputer digital control technology and power electronics technology, so that the power of each battery is basically the same, and the phenomenon of overcharging and over-discharging occurs in the charging and discharging process of the battery. This keeps the battery pack in good working condition, improves the reliability of the battery equipment, extends the service life of the battery and reduces the replacement cost of the battery.